Product Catalog

Protect expensive spark plug wire sets from potential burning, cracking, and hardening typically caused by severe under hood heat. Easily installs on wire by removing distributor boot and sliding Protect-A-Wire(TM) over spark plug wire. Buy in bulk with these 50 foot rolls of Protect-A-Wire. Great for shop use so Protect-A-Wire(TM) is always in stock.

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F.

Protect expensive spark plug wire sets from potential burning, cracking, and hardening typically caused by severe under hood heat. Easily installs on wire by removing distributor boot and sliding Protect-A-Wire(TM) over spark plug wire. Buy in bulk with these 50 foot rolls of Protect-A-Wire. Great for shop use so Protect-A-Wire(TM) is always in stock.

Protect-A-Boots solve the problem of burning and cracking plug boots and wires from header and engine heat. Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look. Our 6'' Protect-A-Boots come with a reinforcement ring at the base for easy plug removal during maintenance. When working on boots with tight bends, try our ringless 8'' Protect-A-Boot (only in silver or Titanium(TM)) instead. For thicker boots, like MSD or Taylor's, we recommend our Protect-A-Boot(TM) Sleeves.

Protect-A-Boots solve the problem of burning and cracking plug boots and wires from header and engine heat. Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look. Our 6'' Protect-A-Boots come with a reinforcement ring at the base for easy plug removal during maintenance. When working on boots with tight bends, try our ringless 8'' Protect-A-Boot (only in silver or Titanium(TM)) instead. For thicker boots, like MSD or Taylor's, we recommend our Protect-A-Boot(TM) Sleeves.

Vapor Block(TM) solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation. Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block(TM). Vapor Block(TM) fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block(TM) installs easily with a split design and adhesive flap.

Protect-A-Boot Ringless Sleeves are superior protection for extreme angled plug wire boots that solve the problem of burning and cracking plug boots and wires from header and engine heat. DEI Protect-A-Boot Ringless Sleeves are uniquely designed to protect spark plug boots & wires against the harmful effects of direct and continuous heat - up to 1200F. Continued exposure to extreme heat generated from the engine block, exhaust manifold and headers can cause burn through, hardening or cracking of the spark plug wires and boots.

Protect-A-Boots XL Ringless solve the problem of burning and cracking plug boots and wires from header and engine heat. Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots XL Ringless provide spark plug boot and wire protection from extreme under hood heat and helps prevent burn-through, hardening and cracking of boots. For thicker boots, like MSD or Taylor's, we recommend our Protect-A-Boot Ringless Sleeves.